POK English catalogue (USA)

POK France - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: export@pok.fr - Web: www.pok.fr 30 TECHNICAL CHARACTERISTICS • Selectable stream pattern: a continuous rotation of the head ring allows the user to progress from a straight stream to narrow spray or "Flashover", to a full fog diffusion cone of 110° forming a wall of water, followed by a flush position to remove any particles. • Swivel inlet connection . • Protection filter protects against pebbles at the inlet connection. • Functions under 230 PSI nominal pressure. • Quick On/Off shutoff valve. CURVES FLOW RATE/PRESSURE - For the 200 and 250 GPM versions This curve represents the pressure variation as a function of the flow rate, inside the "TORNADOMATIC 200" and "TORNADOMATIC 250". Note that the internal regulation device comes into action when the flow rate reaches a value of 80 GPM. After this point, the flow rate increases and is carried out under an approximate constant pressure, from 100 to 116 PSI, up to a value of 250 GPM. Note: The dotted line shows what should be the pressure to get the same flow rate in the absence of a controlled device. CONSTRUCTION • Aluminium alloy construction, AGS T5, new titrated alloy, extremely light. • Resistant to mechanical shock and chemical attack with 50μm hard anodisation . • The head is protected with a polyurethane bumper guard . This elastomer does not melt under heat, is an excellent insulator which allows the user to work under high heat conditions without burning and does not stick to the fingers in low temperatures. • Ergonomic, anti-slip polyurethane pistol grip. • Pins and screws in stainless steel. 100 200 300 400 500 600 0 26 53 79 106 132 158 700 800 900 185 211 238 1000 1100 1200 264 290 317 1300 1400 343 370 1500 396 Cou b pression / débit pressure / flow rate curve FIREFIGHTINGEQUIPMENT Pressure PSI Bar Flow rate l/min GPM Tornadomatic 750 1 2 3 4 5 6 7 8 9 10 11 12 14 29 43 58 72 87 101 116 130 145 159 174 13 14 15 16 17 18 189 203 218 232 247 261 Swivel inlet coupling conform to international norms Shutoff handle with polyurethane bumper. Bumper guard with tactile markings indicating the shape of the stream pattern. 3 stream pattern positions: straight jet, flashover (30°), wide angle spray (110°) The FLUSH position is obtained on full stop limit of the selection ring. Hand nozzles - Autoregulated with ball valve